ESHOOTER Kestrel V3 BASIC Airsoft ETUESH418002
Description of ESHOOTER Kestrel V3 BASIC Airsoft ETU
The Kestrel V3 Basic is the gateway to Kestrel technology for your V3 gearbox weapon. This electronic trigger unit (ETU) delivers key features such as AK/G36 selector exchange, active braking, locked rotor protection, and pre-cocking adjustment with self-learning function. Its robust design, resistance to currents up to 200A, and compatibility with LiPo, LiFe, and LiHv batteries make it the best value-for-money choice for those looking to enhance their weapon without overspending.
More information about ESHOOTER Kestrel V3 BASIC Airsoft ETU
· SKU: V100
· Compatibility: Supports most V3 gearboxes on the market.
· Easy Programming: Only 3 steps are required to complete the desired setup; all functions can be reset by holding the trigger for 8 seconds.
· AK/G36 Selector Exchange: Easily change the selector type with 6 trigger pulls after entering programming mode.
· Pre-cocking Adjustment: Available in five different pre-cocking levels. The KESTREL Basic features a learning function that automatically determines the pre-cocking stop position according to speed and load. It is normal for a single shot to fire a few extra rounds after reconnecting or disconnecting the battery.
· Brushless Motor Compatibility: Compatible with brushless, high-speed, and high-torque motors.
· Pre-feed for Gel BBs: Optional motor feeding function for gel blasters, adjustable from 0.5 to 3 seconds when the battery is connected.
· Durable Shooting: Operates reliably for over 50,000 shots.
· Active Braking: Adaptive function that prevents gear instability, ensures the piston stops in the forward position, and extends the life of the gearbox and internal components.
· Locked Rotor Protection: Prevents gearbox damage through active protection if the gear or motor fails.
· Low Battery Protection: When the battery is low, the motor vibrates 5 times and the blue light flashes 5 times simultaneously.
· Low/High Voltage Protection: Automatically detects the number of lithium battery cells. Supports a minimum of 6 V for 2-cell batteries and 8.5 V for 3-cell batteries. The maximum supported voltage is 17 V.
· High-Temperature Resistant Teflon Wires: Wire diameter over 1.5 mm² and will not melt with prolonged use.
· Current Protection: Supports instantaneous currents up to 200 A without damaging the circuit board.
· Battery Compatibility: Works with LiPo, LiFe, and LiHv batteries without issues.
· Voltage Range: 6 – 17 V
· Current: 17 mA
· Compatibility: Supports most V3 gearboxes on the market.
· Easy Programming: Only 3 steps are required to complete the desired setup; all functions can be reset by holding the trigger for 8 seconds.
· AK/G36 Selector Exchange: Easily change the selector type with 6 trigger pulls after entering programming mode.
· Pre-cocking Adjustment: Available in five different pre-cocking levels. The KESTREL Basic features a learning function that automatically determines the pre-cocking stop position according to speed and load. It is normal for a single shot to fire a few extra rounds after reconnecting or disconnecting the battery.
· Brushless Motor Compatibility: Compatible with brushless, high-speed, and high-torque motors.
· Pre-feed for Gel BBs: Optional motor feeding function for gel blasters, adjustable from 0.5 to 3 seconds when the battery is connected.
· Durable Shooting: Operates reliably for over 50,000 shots.
· Active Braking: Adaptive function that prevents gear instability, ensures the piston stops in the forward position, and extends the life of the gearbox and internal components.
· Locked Rotor Protection: Prevents gearbox damage through active protection if the gear or motor fails.
· Low Battery Protection: When the battery is low, the motor vibrates 5 times and the blue light flashes 5 times simultaneously.
· Low/High Voltage Protection: Automatically detects the number of lithium battery cells. Supports a minimum of 6 V for 2-cell batteries and 8.5 V for 3-cell batteries. The maximum supported voltage is 17 V.
· High-Temperature Resistant Teflon Wires: Wire diameter over 1.5 mm² and will not melt with prolonged use.
· Current Protection: Supports instantaneous currents up to 200 A without damaging the circuit board.
· Battery Compatibility: Works with LiPo, LiFe, and LiHv batteries without issues.
· Voltage Range: 6 – 17 V
· Current: 17 mA
CQB+ is an official Eshooter product distributor, ensuring the authenticity of all products and offering you the best prices on the market. Shop with confidence at CQB+ to get genuine Eshooter products and enjoy the best after-sales service.
